Description

HCS DataLink 250 28AWG CAT6 LS0H slim and thin modular cord series consists of 100 Ohm impedance, 4-pair U/UTP RJ45 terminated cords for work area, jumper and patching in tight locations such as high density cabinets in data-centers. HCS CAT6 28AWG modular cords exceed all ANSI/TIA/568.2-D and ISO/IEC-11801 Category 6 requirements and they can be used with either T568A or T568B RJ45 jacks.

Application
HCS DataLink 250 CAT6 28AWG modular cords support all relevant LAN applications, including the following protocols:
☑ 2.5GBASE-T & 5GBASE-T ☑ 1GBASE-T ☑ ATM 155 ☑ TP-PMD ☑ 100BASE-T ☑ 100BASE-T2 ☑ 100BASE-T4 ☑ 100BASE-TX ☑ Token Ring 100 Mbps ☑ ATM 52 ☑ ATM 25 ☑ 10BASE-T Ethernet ☑ Broadband and Baseband Video ☑ ISDN Basic and Primary Access ☑ 1BASE-5 Starlan ☑ ITU V.21 and X.11
Qualifications and Approvals
HCS DataLink 250 CAT6 28AWG modular cords a retested and verified for full compliance with the following standards:
☑ Category 6 cord limits according to ANSI/TIA/568-2-D ☑ Category 6 cord limits according to ISO/IEC-11801

Benefits & Features

→ Extremely low cable OD and slim form factor - Ideal for high-density panels and cabinets in data-centers. → Testing every cord prior to shipment - Providing the highest degree of quality assurance. → Exceptional material properties and cable design - Providing the highest degree of reliability. → High Return Loss and NEXT Loss values - Providing low BER (Bit-Error-Rate) in all applications. → Extremely high pair-balance - Providing excellent EMC (Electro Magnetic Compatibility), minimizing radiation and maximizing noise immunity. → Smooth and limp LS0H ja cket - Pro viding comfo rtable cord handling and safety. → Unique DoubleSafe™ Quality Assurance Program - Providing lowest rejection rate available.

	GENERAL PROPERTIES

4 color-coded, unshielded twisted pairs cabled together and overall jacketed. Both cable ends terminated with unshielded modular plug connectors conforming to IEC 60603-7-4.
Basic Cable Conductor	Stranded, 28 AWG, 7x0.12 mm, bare annealed copper
Wire Insulation	Polyolefin
Number of insulated conductors	8, twisted in 4 pairs.
Color Code of Pairs	Blue x White/Blue, Orange x White/Orange, Green x White/Green, Brown x White/Brown.
Overall Tape Wrap	None.
Overall shield	None.
Drain wire	None.
Outer Jacket  and boots	LS0H Halogen free flame retardant compound.
Standard Jacket and boot Color	Light Gray RAL 7035. Other colors available upon request.
Standard Surface Marking	Includes HCS P/N, cable description, Meter mark and Batch Number.
Cable to plug tensile strength	90N min.
Pulling force	7N max.
Storage Temperature	-20 to +60C
Durability	1200 mating cycles
Cable OD:	3.7±0. 2 mm
Bend radius	23 mm min.
Plug housing material	Polycarbonate, conforming to UL 94 V-0.
Plug contact material	50 micro-inches gold plating over 100 micro-inches nickel plated copper alloy.
Temperature operating range	-20 to +60C
Flame Test	IEC 60332-1.