DataLink 500A Category 6A S/FTP
28AWG Modular Cords (Type L)
Description
HCS DataLink 500A 28AWG CAT 6A LS0H slim and thin modular cord series consists of 100 Ohm impedance, 4-pair S/FTP RJ45
terminated cords for work area, jumper and patching in tight locations such as high density cabinets in data-centers.
HCS CAT6A 28AWG modular cords exceed all ANSI/TIA-568.2-D and ISO/IEC-11801 Category 6A requirements and they can be used
with either T568A or T568B RJ45 jacks.

Application
HCS DataLink 500A CAT6A 28AWG modular cords support all presently available and future LAN applications, including the following protocols:
 10GBASE-T
 2.5GBASE-T & 5GBASE-T
 1000BASE-T
 ATM 155
 TP-PMD
 100BASE-T Fast Ethernet
 100BASE-T2
 100BASE-T4
 100BASE-TX
 Token Ring 100 Mbps
 ATM 52
 ATM 25
 10BASE-T Ethernet
 Token Ring 4 Mbps and 16 Mbps
 Broadband and Baseband Video
 ISDN Basic and Primary Access
 ITU V.21 and X.11
 

Qualifications and Approvals
HCS DataLink 500A CAT6A 28AWG modular cords are tested and verified for full compliance with the following standards:
 Category 6A according to ANSI/TIA-568.2-D
 Category 6A according to ISO/IEC-11801

Benefits & Features
Extremely low cable OD and slim form factor - Ideal for high-density panels and cabinets in data-centers.
Testing every cord prior to shipment - Providing the highest degree of quality assurance.
Unique double termination method - Providing the advantages of both molded and non-molded terminations.
Exceptional material properties and cable design - Providing the highest degree of reliability.
High Return Loss and NEXT Loss values - providing low BER (Bit-Error-Rate) in all applications.
Extremely high pair-balance and overall cable shield - Providing excellent alien crosstalk loss and noise immunity.
Revolutionary pair lay scheme - providing an extremely low delay skew.
Smooth and limp jacket - Providing comfortable cord handling.
Unique DoubleSafe™ Quality Assurance Program - Providing lowest rejection rate available.


GENERAL PROPERTIES
4 color-coded, individually foil shielded twisted pairs cabled together, overall braid shielded and jacketed. Both cable ends terminated with shielded modular RJ45 plugs conforming to IEC 60603-7-5.
Basic Cable Conductor Stranded, 28 AWG, 7x0.12 mm, bare annealed copper
Wire Insulation Polyolefin
Number of insulated conductors 8, twisted in 4 pairs.
Color Code of Pairs Blue x White/Blue, Orange x White/Orange, Green x White/Green, Brown x White/Brown.
Individual pair shield Polyester-Aluminum foil, providing 100% coverage with 25% overlap, aluminum facing out.
Overall shield Tinned copper braid, 50% coverage, laid in close contact with the individual foil shields.
Drain wire None.
Outer Jacket  and boots LS0H Halogen free flame retardant compound.
Standard Jacket and boot Color Light Gray RAL 7035. Other colors available upon request.
Standard Surface Marking Includes HCS P/N, cable description, Meter mark and Batch Number.
Cable to plug tensile strength 90N min.
Pulling force 7N max.
Storage Temperature -20 to +60C
Durability  1200 mating cycles
Cable OD 5.8±0.2mm
Bend radius 25 mm min.
Plug housing material Polycarbonate, conforming to UL 94 V-0. 
Plug contact material 50 micro-inches gold plating over 100 micro-inches nickel plated copper alloy. 
Temperature operating range -20 to +60C
Flame Test IEC 60332-1.