Description

Phy-FiXX™ is a revolutionary and advanced physical layer management suit providing enterprises with the ability to manage their Physical Layer infrastructure with a level of visibility & integration unique in the structured cabling industry. Using a combination of software, electronics and structured cabling products, Phy-FiXX™ enables users to track and manage their investment from planning through to design, procurement, installation, moves, adds and changes (MACs) and the eventual upgrade of the infrastructure, thereby spanning its entire lifecycle. HCS Phy-FiXX™ Category 6 unshielded Patch Panels are used within the Phy-FiXX™ System. Each 1U 24 Port Patch Panel has one data bus connection port locatedon the rear of the panel. The data bus connection port connects the panel to the Phy-FiXX™ scanner via a standard RJ45 patch cord. The patch panel is used by the Phy-FiXX™ system to track connectivity in the patch zone and work area. LED status indicators on the panel show status of connectivity between the panel and the scanner and also provide panel guidance for work orders. The IDC section of the Phy-FiXX™ Patch Panels consist of V-shaped contacts that flex not fatigue when terminated. Each port features a patented spring-loaded shutter. The patch panel works as a conventional patch panel when not connected to the Phy-FiXX™ system. All Phy-FiXX™ patch panels fully conform to and provide a substantial margin above all ANSI/TIA-568.2-D and ISO/IEC-11801 (2nd Edition) Category 6 component requirements. The HCS Phy-FiXX™ Logo and the DataLink 250E Trademark ensure long lasting high-performance and full support of most present

Application
HCS Phy-FiXX™ DataLink 250E unshielded copper RJ-45 patch panels are used within the Phy-FiXX™ System for horizontal distribution or equipment terminations in telecommunications rooms and for interconnection terminations in consolidation points, and they fully support the following protocols:
☑ 1GBASE-T Gigabit Ethernet ☑ ATM 155 ☑ TP-PMD ☑ 100BASE-T "Fast Ethernet" ☑ ITU V.21 and X.11 ☑ 100BASE-T2	☑ 100BASE-T4 ☑ 100BASE-TX ☑ Token Ring 100 Mbps ☑ ATM 52 ☑ ATM 25 ☑ 10BASE-T Ethernet	☑ Token Ring 4 Mbps and 16 Mbps ☑ Broadband and Baseband Video ☑ ISDN Basic Primary Access ☑ 1BASE-5 Starlan ☑ ISALAN
Qualifications and Approvals
HCS Phy-FiXX™ DataLink 250E panels are supported by the Century™ Lifetime Warranty and by the DoubleSafe™ QA program as a part of complete HCS cabling system. HCS Phy-FiXX™ DataLink 250E panels are tested at the component level and they comply to the following standards:

Transmission:	EMC:	Safety:
☑ ANSI/TIA-568-C.1 ☑ ANSI/TIA-568.2-D ☑ ISO/IEC-11801	☑ EN-55022, Class B (Europe) ☑ FCC Part 15, Subpart J, Class A (USA)	☑ UL94 V-0 rated plastic materials ☑ Zero-halogen in LS0H constructions.

Benefits & Features

→ Two power status indicators to ensure proper connection of power supply from the scanner. → Data bus connection to the Phy-FiXX™ Scanner done with an industry standard RJ45 patch cord → Category 6 field configurable for T568A or T568B wiring options. → Integral cable management shelf ensures bend radius compliance. → International hardware kit contains both ANSI and metric hardware → Can be terminated using industry standard punch-down tools. → Exceptional material properties and design - providing a unique Century™ Lifetime Warranty. → Supplied with front labeling card index strip - providing simple and elegant port identification. → Detailed installation manual in English and Turkish - providing clear and comprehensive instructions. → Exceeding Category 6 performance - providing full support to Gigabit Ethernet. → Robust and installer-friendly design - providing reduced installation and operating costs. → Compatible with 22-24 AWG solid conductors - providing support to a wider range of cabling types.

Connectivity Features

→ LED status indicators on both the panel sides show status of connectivity between the panel and the scanner. → LED status indicator on the panel calls for operator action (connect/disconnect patch-cord). → LED status indicators on each port calls for operator action (connect/disconnect patch-cord). → LED status indicators can be activated and deactivated from a remote location by the network supervisor.

	GENERAL PROPERTIES

Wire size range	22-24 AWG, Solid.
Material of construction	CRS (cold rolled steel) 1.52 mm thickness.
Coating and color	Black Zinc.
Connector module holder	High impact, Flame-retardant plastic compound, UL 94 V-0.
Jack Housing material	Zinc Alloy plated bright Ni/Cu
IDC plastic housing	Polycarbonate UL94 V-0.
Jack contact material	Copper alloy plated with 1.25μm Gold over Nickel.
IDC contact material	Copper alloy plated with Matte Tin.
Plug Retention Force	6.8 Kgf (66 N) min.
Jack contact force	100 grams min.
IDC terminations cycles	20 min. using same-gauge wires.
IDC type	Gas tight
Jack insertion durability	750 mating cycles
Storage temperature range	-20 to +60C
Installation and operation conditions	0 to +50C at 0-90% RH (Non condensing)
Packaging	One unit per box.
Shipping weight	560 gr.