DataLink 16 Category 3 U/UTP 100 Ohm Horizontal and Backbone Indoor LAN Cables
Description
HCS DataLink 16 indoor cable series consists of 100 Ohm impedance, 4-300 pair U/UTP cables for indoor horizontal and backbone installations in local area networks (LANs). All cables fully conform to and provide a substantial margin above all Category 3
ANSI/TIA-568.2-D transmission requirements.

Application
HCS DataLink 16 Horizontal and backbone cables support the following protocols:
 10BASE-T Ethernet
 Token Ring 4 Mbps
 ISDN Basic and Primary Access
 1BASE-5 Starlan
 ISALAN
 ITU V.21 and X.11

Qualifications and Approvals
HCS DataLink 16 Cables are tested and verified for full compliance with the transmission properties of following standard:
 Category 3 according to ANSI/TIA-568.2-D
 Category 3 according to IEC 61156-4

Benefits & Features
Exceptional material properties and cable design - providing a unique Century™ Lifetime Warranty.
Extremely high pair-balance - providing excellent EMC (Electro Magnetic Compatibility), minimizing radiation and maximizing noise immunity.
Revolutionary pair lay scheme - providing an extremely low delay skew.
Descending sequential meter mark - providing easy stock and left-over handling.
Smooth and rigid jacket - proving fast and easy cable pulling and installation.
Batch number printed every meter - providing fast retrieval of test results from data-base.
A comprehensive product range - providing all state-of-the-art cable constructions.
Unique DoubleSafe™ Quality Assurance Program providing lowest rejection rate available.


PHYSICAL AND MECHANICAL PROPERTIES
4-300 Color-coded, unshielded twisted pairs cabled together and overall jacketed.
Basic Conductor Solid, 24AWG, bare annealed copper, PO Insulated.
Insulation Polyolefin.
Color code Next page.
Outer Jacket LS0H Halogen free flame retardant or PVC compound.
Standard Jacket Color Light Gray RAL 7035. Other color available upon request.
Standard Surface Marking Includes HCS P/N, cable description, Meter mark and Batch Number.
Pulling force 50 N/mm2 max.
Short Term Bend Radius 8xOD mm.
Long Term Bend Radius 4xOD mm.
Storage Temperature -20 to +80C.
Temperature operating range -20 to +60C.
Flame Test IEC 60332-1.
Conductor Size Test UL 444.
Halogen content in LS0H cables Null.


COLOR CODE - WIRE COLOR INSIDE EACH 25-PAIR GROUP
Pair No. Color Code Pair No. Color Code
1 White x Blue 13 Black x Green
2 White x Orange 14 Black x Brown
3 White x Green 15 Black x Grey
4 White x Brown 16 Yellow x Blue
5 White x Grey 17 Yellow x Orange
6 Red x Blue 18 Yellow x Green
7 Red x Orange 19 Yellow x Brown
8 Red x Green 20 Yellow x Grey
9 Red x Brown 21 Violet x Blue
10 Red x Grey 22 Violet x Orange
11 Black x Blue 23 Violet x Green
12 Black x Orange 24 Violet x Brown
- - 25 Violet x Grey