| DataLink 500A | Category 6A U/FTP 100 Ohm Horizontal LAN Cables |
| Description |
| HCS DataLink 500A cable series consists of 100 Ohm impedance, 4-pair and 8-pair U/FTP cables for horizontal installations in local area networks (LANs). All cables fully conform to and provide a substantial margin above all Category 6A ScTP requirements of ANSI/TIA-568.2-D and Category 6A of IEC 61156-5. All cables fully support IEEE 802.3at 2009 Part 3 Amendment 3 including PoE+. |
| Application | |
| HCS DataLink 500A Horizontal cables support all presently available and future LAN applications, including the following protocols: | |
|
☑ IEEE 802.3an 10GBASE-T 10
Gigabit Ethernet ☑ 1000BASE-T Gigabit Ethernet ☑ ATM 155 ☑ TP-PMD ☑ 100BASE-T "Fast Ethernet" ☑ 100BASE-T2 ☑ 100BASE-T4 ☑ 100BASE-TX ☑ Token Ring 100 Mbps ☑ ATM 52 ☑ ATM 25 ☑ 10BASE-T Ethernet ☑ Token Ring 4 Mbps and 16 Mbps ☑ Broadband and Baseband Video ☑ ISDN Basic and Primary Access ☑ 1BASE-5 Starlan ☑ ISALAN ☑ ITU V.21 and X.11 |
|
|
Qualifications and Approvals |
|
| HCS DataLink 500A Cables are tested and verified for full compliance with the following standards: | |
|
☑ Category 6A UTP according to
ANSI/TIA-568.2-D. ☑ Category 6A according to IEC 61156-5. |
|
Benefits & Features |
|
→
Exceptional transmission properties - suitable for 10GBE
applications on 100m channels. → Testing every reel of cable prior to shipment - providing the highest degree of quality assurance. → Exceptional material properties and cable design - providing a unique Century™ Lifetime Warranty. → High ACR values - providing low BER (Bit-Error-Rate) in all applications. → Extremely high pair-balance and individual foil shields - providing excellent EMC (Electro Magnetic Compatibility), minimizing radiation and maximizing noise immunity. → Revolutionary pair lay scheme - providing an extremely low delay skew. → Co-extruded crisp and clear spiral color coding of wires - providing positive wire identification and ease of installation. → Descending sequential meter mark - providing easy stock and left-over handling. → Smooth and rigid jacket - proving fast and easy cable pulling and installation. → Batch number printed every meter - providing fast retrieval of test results from data-base. → Unique DoubleSafe™ Quality Assurance Program providing lowest rejection rate available. |
| PHYSICAL AND MECHANICAL PROPERTIES | ||
| 4 color-coded, individually foil-shielded twisted pairs cabled together with a tin-coated drain-wire, overall wrapped with a polyester tape and overall jacketed. Siamese (Figure-8) cables are made of two identical 4-pair cables connected in a zip-cord formation, one cable identified with a longitudinal rib. | |
| Basic Conductor | Solid, 23AWG bare annealed copper |
| Insulation | Polyolefin |
| Number of insulated conductors | 8, twisted in 4 pairs. (8 pairs in FIG-8 cables) |
| Color Code of Pairs | Blue x White, Orange x White, Green x White, Brown x White. |
| Individual pair shield | Laminated aluminum foil (foil face outward) providing 100% coverage. |
| Drain wire | Solid, 24AWG, 0.51 mm, tin-coated annealed copper |
| Overall tape | Polyester tape providing 100% coverage. |
| Outer Jacket | LS0H Halogen free flame retardant or PVC compound. |
| Standard Jacket Color | Light Gray RAL 7035. Other colors available upon request. |
| Standard Surface Marking | Includes HCS P/N, cable description, Meter mark and Batch Number. |
| Pulling force | 50 N/mm2 max. |
| Short Term Bend Radius | 8xOD mm |
| Long Term Bend Radius | 4xOD mm |
| Storage Temperature | -20 to +80C |
| Temperature operating range | -20 to +60C |
| Flame Test | IEC 60332-1 |
| Conductor Size Test : | UL 444. |
| Halogen content in LS0H cables | Null. |