Description

Category 7A S/FTP outdoor cable, conforming to IEC 61156-5-2009, tested up to 1000MHz. The cable contains 4 individually foil-shielded twisted pairs cabled together, overall shielded with a tinned-copper braid and inner jacketed with LS0H (HFFR) compound for indoor use. An additional black PVC jacket provides protection for outdoor use.The cable fully supports all IEEE 802.3 PoE applications including Type 1, 2, 3 & 4, CISCO UPoE & UPoE+ and HDBase-T PoH. The cable fully supports all ISO/IEC 11801 and TIA-568.2-D applications up to IEEE 10GBASE-T.

Application
HCS DataLink 1000 Horizontal cables support all presently available and future LAN applications, including the following protocols:
☑ Broadband Digital and Analog CATV signals up to 1000 MHz ☑ SOHO and multiple simultaneous applications on all 4 pairs ☑ IEEE 802.3an 10GBASE-T 10 Gigabit Ethernet ☑ 1000BASE-T 1 Gigabit Ethernet ☑ ATM 155 ☑ TP-PMD ☑ 100BASE-T "Fast Ethernet" ☑ 100BASE-T2 ☑ 100BASE-T4 ☑ 100BASE-TX ☑ Token Ring 100 Mbps ☑ ATM 52 ☑ ATM 25 ☑ 10BASE-T Ethernet ☑ Token Ring 4 Mbps and 16 Mbps ☑ Broadband and Baseband Video ☑ ISDN Basic and Primary Access ☑ 1BASE-5 Starlan ☑ ISALAN ☑ ITU V.21 and X.11
Qualifications and Approvals
HCS DataLink 1000 Cables are tested and verified for full compliance with the following standards:
☑ Category 7A according to IEC 61156-5 (for ISO/IEC-11801 2nd Edition).

Benefits & Features

→ Exceptional transmission properties - suitable for 10GBE applications on 100m channels. → Testing every reel of cable prior to shipment - providing the highest degree of quality assurance. → Exceptional material properties and cable design - providing a unique Century™ Lifetime Warranty. → High ACR values - providing low BER (Bit-Error-Rate) in all applications. → Extremely high pair-balance and double shield - providing excellent EMC (Electro Magnetic Compatibility), minimizing radiation, maximizing noise immunity and preventing any alien-crosstalk (AXT). → Revolutionary pair lay scheme - providing an extremely low delay skew. → Descending sequential meter mark - providing easy stock and left-over handling. → Smooth and rigid jacket - proving fast and easy cable pulling and installation. → Batch number printed every meter - providing fast retrieval of test results from data-base. → A comprehensive product range - providing all state-of-the-art cable constructions. → Large variety of packaging options - providing minimum scrap and left-over cable sections. → Unique DoubleSafe™ Quality Assurance Program providing lowest rejection rate available. → Full compliance with EU Directive 2011/65/EU (RoHS-2).

	PHYSICAL AND MECHANICAL PROPERTIES

Basic Conductor	Solid, 23AWG, bare annealed copper.
Insulation	SFS-PO
Number of insulated conductors	8, twisted in 4 pairs.
Color Code of Pairs	Blue x White, Orange x White, Green x White, Brown x White.
Individual pair shield	Polyester-aluminum foil (foil face out), providing 100% coverage.
Overall shield	Tin coated copper braid, laid in close contact over the inner foils.
Drain Wire	26AWG tin-coated copper wire laid in contact with the aluminum foils.
Inner Jacket/ Color	LS0H (HFFR) compound for indoor use./ Grey RAL 9002.
Ripcord	Available
Outer Jacket/ Color	Heavy-duty, UV-resistant PVC compound for outdoor use. Black RAL 9005.
Standard Surface Marking	Includes HCS P/N, Cable Description, Meter Mark and Batch Number.
Pulling force	150 N/mm2 max.
Short Term Bend Radius	8xOD mm
Long Term Bend Radius	4xOD mm
Storage temperature	-20 to +75C
Operating temperature	-20 to +60C
Installation temperature	0 to +50C
Optional Flame Tests (inner and outer cables)	IEC 60332-1
Conductor Size Test	UL 444