| DataLink 16 |
Category 3
Unshielded RJ-45 Patch Panels |
| Description |
| HCS
DataLink 16 unshielded copper 50 port RJ-45 patch panel is a high
performance Category 3 panel, made with 5 modules of fixed 10-port PCB units in 1U. The back interconnections are available in 110 IDC or LSA-Plus blocks with 6-3 and 4-5 pairs terminations. The panel fully conform to and provide a substantial margin above all ANSI/TIA-568.2-D Category 3 requirements. The HCS Logo and the DataLink 16 Trademark ensure long lasting high-performance and full support of all relevant applications. |
| Application | |
| HCS DataLink 16 panels support the following protocols: | |
|
☑ 10BASE-T Ethernet ☑ Token Ring 4 Mbps ☑ ISDN Basic and Primary Access ☑ 1BASE-5 Starlan ☑ ISALAN ☑ ITU V.21 and X.11 |
|
| Qualifications and Approvals | |
| HCS DataLink 16 Panels are tested and verified for full compliance with the following standard: | |
| ☑ Category 3 according to ANSI/TIA-568.2-D | |
| Transmission: | EMC: | Safety: |
| ☑ ANSI/TIA-568.2-D |
☑ EN-55022, Class B (Europe) ☑ FCC Part 15, Subpart J, Class A (USA) |
☑ UL94 V-0 rated plastic materials |
| Benefits & Features |
| →
Exceptional material properties and design - providing a most
reliable termination. → Detailed installation manual in English and Turkish - providing clear and comprehensive instructions. → Exceeding Category 3 performance - providing full support of all DSL modems, ISDN and all voice applications. → Robust and installer-friendly design - providing reduced installation and operating costs → Compatible with 24-26 AWG solid or stranded conductors - providing support to a wider range of cabling types. → Unique DoubleSafe™ Quality Assurance Program - providing lowest rejection rate available. |
| GENERAL PROPERTIES | ||
| Wire size range | 22 to 26 AWG, Solid or stranded (7) |
| Material of construction | Galvanized Steel. |
| Paint and standard color | Black, Powder paint finish or plastic front. |
| Connector module holder | High impact, Flame-retardant plastic compound, UL 94 V-0. |
| Housing material - Jack & IDC | High impact FR plastic rated UL 94 V-0. |
| Jack spring contact coating | 1.27µm (50µ-Inch) hard Gold over 2.54µm (100µ-Inch) Nickel plating |
| Plug Retention Force | 14 Kgf (140N) min. |
| Plug to jack contact force | 100 grams min. (using HCS approved plug). |
| IDC terminations cycles | 200 min. |
| IDC type | Gas tight |
| Plug insertion durability | 750 mating cycles |
| Storage temperature range | -40 to +70C |
| Operation conditions | -20 to +60C at 0-90% RH (Non condensing) |
| Packaging | One unit per box. |