General Properties – Distribution Cable Assembly

Conductor size:	24AWG solid bare copper
MAX OD:	12.7mm
Jacket:	PVC or LS0H
Temperature range:	-20 to +60C at 0-90% RH (Non condensing)
Flame Performance:	Conforming to IEC 60332-1

	General Properties – iPass Plug Connector

Housing:	Zinc Alloy
Contact Material:	FR4 PCB
Contact Pad Plating:	PVC or LS0H
Insertion Force:	1.27µm (50µ-Inch) hard Gold over 2.54µm (100µ-Inch) Nickel plating
Flame Performance:	60 N

	General Properties – Distribution Cable Assembly

Frequency	Insertion Loss		NEXT Loss		FEXT Loss		RL
MHz	dB		dB		dB		dB
	Nom	Max	Nom	Min	Nom	Min	Nom	Min
1.00	0.02	0.10	85.0	65.0	77.0	65.0	55.0	30.0
4.00	0.03	0.10	75.0	65.0	65.0	63.1	50.0	30.0
8.00	0.04	0.11	70.0	64.9	60.0	57.0	48.0	30.0
10.00	0.04	0.13	68.0	63.0	58.0	55.1	42.0	30.0
16.00	0.05	0.16	64.0	58.9	54.0	51.0	40.0	30.0
25.00	0.06	0.20	60.0	55.0	50.0	47.1	35.0	30.0
31.25	0.07	0.22	58.0	53.1	48.0	45.2	33.0	30.0
62.50	0.11	0.32	52.0	47.1	42.0	39.1	28.1	24.1
100.00	0.15	0.40	45.0	43.0	38.0	35.1	24.0	20.0

Propagation Delay	2.5 nS max @ 1-100 MHz
Propagation Delay Skew	1.25 nS max @ 1-100 MHz
Current rating	1.5 A max.
Contact resistance	20 mOhm max (per contact)
Input/Output resistance	200 mOhm max
Input/Output resistance Unbalance	50 mOhm max
Voltage rating	72 Vdc max.
Dielectric strength	1000 Volts rms for 1 minute
Insulation Resistance	500 MegaOhm min @ 500 Vdc
DC Resistance	0.1 Ohm max @ 20C
TCL	28-20·Log(f/100) dB min @ 1-100 MHz
Transfer Impedance	N/A

	ORDERING INFORMATION

HCS P/N	Panels Description	TELCO Blocks	Units	Notes
P00-P0401-1U	Unshielded empty patch panel, 19", 1U, for 4xiPass cassettes insert	-	1u	-
P5E-P0602-1U	6 port RJ-45 to iPass Unshielded 1000BASE-T 19" cassette	1	1u	-
P5E-P1202-1U	12 port RJ-45 to iPass Unshielded 1000BASE-T 19" cassette	2	1u	-

HCS P/N	Modular Cords Description	Plugs	Length	Notes
T5E-P02510-XX	25x2x24# UTP CAT 5e PVC iPass modular Cord Grey	iPass	XX m	-
T5E-P02520-XX	25x2x24# UTP CAT 5e LS0H iPass modular Cord Grey	iPass	XX m	-