DataLink 250E Category 6E Unshielded RJ-45 Copper Straight Patch Panels (Jacks)
Description
HCS DataLink 250E unshielded copper RJ-45 patch panel series includes high performance Enhanced Category 6 panels specially designed for structured premise cabling in local area networks (LANs).
HCS DataLink 250E straight patch panels are ideal for data-centers and installations of high density or which utilize extensive side and end-of-the-rack cable management. The IDC section consists of V-shaped contacts that flex (not fatigue) when terminated. Each RJ45 port features a patented spring-loaded shutter and can be color coded to match jack outlets with the use of optional port icons. Offering both front and rear labeling options, the patch panel is constructed of cold-rolled steel for additional strength and durability.
All panels fully conform to and provide a substantial margin above all ANSI/TIA-568.2-D and ISO/IEC-11801 (2nd Edition) Category 6 component requirements, tested at the component level.
The HCS Logo and the DataLink 250E Trademark ensure long lasting high-performance and full support of all present and emerging applications.

Application
HCS DataLink 250E unshielded copper RJ-45 straight patch panels are mainly used for horizontal distribution or equipment terminations in data-centers, dense telecommunications rooms and for interconnection terminations in consolidation points, and they fully support all presently available LAN applications, including the following protocols:
 1000BASE-T Gigabit Ethernet
 ATM 155
 TP-PMD
 100BASE-T "Fast Ethernet"
 100BASE-T2
 100BASE-T4
 100BASE-TX
 Token Ring 100 Mbps
 ATM 52
 ATM 25
 10BASE-T Ethernet
 Token Ring 4 Mbps and 16 Mbps
 Broadband and Baseband Video
 ISDN Basic and Primary Access
 1BASE-5 Starlan
 ISALAN
 ITU V.21 and X.11
 Token Ring 4 Mbps and 16 Mbps
 Broadband & Baseband Video
 ISDN
 1BASE-5 Starlan
 ISALAN
 ITU V.21 and X.11
Qualifications and Approvals
HCS DataLink 250E panels are supported by the Century™ Lifetime Warranty and by the DoubleSafe™ QA program as a part of complete HCS cabling system.
HCS DataLink 250 panels are tested at the component level and they comply to the following standards:

Transmission: EMC: Safety:
ANSI/TIA-568-C.1
ANSI/TIA-568.2-D
ISO/IEC-11801
EN-55022, Class B (Europe)
FCC Part 15, Subpart J, Class A (USA)
UL94 V-0 rated plastic materials
Zero-halogen in LS0H constructions

Benefits & Features
Exceptional material properties and design - providing a unique Century™ Lifetime Warranty.
Detailed installation manual in English and Turkish - providing clear and comprehensive instructions.
Exceeding Category 6 performance - providing full support to Gigabit Ethernet over Category 5e and Category 6 cabling systems.
Robust and installer-friendly design - providing reduced installation and operating costs.
Compatible with 24-22 AWG solid conductors - providing support to a wider range of cabling types.
Unique DoubleSafe™ Quality Assurance Program - providing lowest rejection rate available.
Each port features the patented spring-loaded shutter prevents incomplete mating & protects from dust and contaminants.
Patented IDC V-shaped contacts that flex (not fatigue) when terminated.
Features pointed IDC towers to speed termination and enhance cable retention.
Dual color-coding allows for 568 A/B wiring configuration.
Front and rear port labeling (port sequence 1–48) as well as panel identification label.
4 x 6 ganged jack configuration.
Individually removable patch panel ports.
Removable cable management shelves ensure bend radius compliance.
Can be terminated using industry standard punch-down tools.
RJ45 port which is RJ-11 compatible.
Molded category identification on each port face as well as optional port identification icons.

GENERAL PROPERTIES
Wire size range 22 to 24 AWG, Solid conductors.
Material of construction CRS (Cold rolled steel), 1.5mm thickness.
Paint and standard color Black or Grey.
Plastic parts High impact, Flame-retardant plastic compound, UL 94 V-0.
Housing material - Jack & IDC High impact FR plastic rated UL 94 V-0. 
Jack spring contact Phosphor Bronze with 50µ" hard Gold over 100µ" Nickel plating
Plug Retention Force 50N min.
Plug to jack contact force 100 grams min. (using HCS approved plug).
IDC terminations cycles 20 min.
IDC type Gas tight
Plug insertion durability 750 mating cycles
Storage temperature range -40 to +70C
Operation conditions -20 to +60C at 0-90% RH (Non condensing)
Packaging -One unit per box.