Description

HCS DataLink 250E patented shielded copper RJ-45 tool-less keystone jack series includes high performance Category 6 snap-in 8-position/8-contact (8P8C) jacks conforming to IEC 60603-7-5 (shielded 250 MHz connectors). These snap-fit keystone modular jacks have a tool-free design that does not require a punch-down tool during cable termination. HCS DataLink 250E jacks are designed for fast and easy snap-in and out of wall plates, patch panels and surface box outlets. All HCS DataLink 250E jacks are designed in a 90° formation and are color-coded for both T568A and T568B on the wire terminal for ease of installation. All jacks are fully shielded with high quality, corrosion resistant die-cast metal shield. All jacks conform to and provide a substantial margin above ANSI/TIA-568.2-D and ISO/IEC-11801 (2nd Edition) Category 6 component requirements. The HCS Logo and the DataLink 250E Trademark ensure long lasting high-performance and full support of most applications, including 1GBASE-T (Gigabit-Ethernet).

Application
HCS DataLink 250E shielded copper tool-less RJ-45 keystone jacks are used in wall plates, patch panels and surface box outlets and they fully support all presently available LAN applications, including the following protocols:
☑ 1000BASE-T Gigabit Ethernet ☑ ATM 155 ☑ TP-PMD ☑ 100BASE-T "Fast Ethernet" ☑ 100BASE-T2	☑ 100BASE-T4 ☑ 100BASE-TX ☑ Token Ring 100 Mbps ☑ ATM 52 ☑ ATM 25 ☑ 10BASE-T Ethernet	☑ Token Ring 4 Mbps and 16 Mbps ☑ Broadband and Baseband Video ☑ ISDN Basic and Primary Access ☑ 1BASE-5 Starlan ☑ ISALAN ☑ ITU V.21 and X.11
Qualifications and Approvals
HCS DataLink 250E jacks are supported by the Century™ Lifetime Warranty and by the DoubleSafe™ QA program as a part of complete HCS cabling system. HCS DataLink 250E tool-less jacks comply to IEC 60603-7-5 (shielded 250 MHz connectors) and to the following standards:

Transmission:	EMC:	Safety:
☑ ANSI/TIA-568-C.1 ☑ ANSI/TIA-568.2-D ☑ ISO/IEC-11801	☑ EN-55022, Class B (Europe) ☑ FCC Part 15, Subpart J, Class A (USA)	☑ UL94 V-0 rated plastic materials ☑ Zero-halogen in LS0H constructions.

Benefits & Features

→ Tool-free design - providing easy cable termination without any punch-down tool. → Exceptional material properties and design - providing a unique Century™ Lifetime Warranty. → High quality corrosion-resistant die-cast metal shield - providing excellent EMC (Electro Magnetic Compatibility), minimizing radiation and maximizing noise immunity. → Patented 90° design - providing easier access, better and faster wire connection. → Detailed installation manual in English and Turkish - providing clear and comprehensive instructions. → Exceeding Category 6 performance - providing full support to Gigabit Ethernet. → Robust and installer-friendly design - providing reduced installation and operating costs. → Compatible with 22-24 AWG solid or stranded conductors - providing support to a wider range of cabling types. → Unique DoubleSafe™ Quality Assurance Program - providing lowest rejection rate available.

	GENERAL PROPERTIES

Housing Material	High impact, Flame-retardant plastic compound, UL 94 V-0.
Overall shield	Fully shielded corrosion-resistant die-cast metal case.
Jack Contacts Material	50µ-inches gold plating over 100µ-inches nickel plated copper alloy.
Environmental conditions	-40 to +60C at 0-90% RH (Non condensing)
Packaging	50 or 100 Units per box.
Plug Retention Force	14 Kgf (140N) min.
Plug to jack contact force	100 gr. min. (using HCS approved plug).
Storage Temperature	-20 to +80C
Plug insertion durability	750 mating cycles
Conductor compatibility range	22 to 24 AWG, solid or stranded