DataLink 500A |
Category 6A Unshielded RJ45 Tool-Less Keystone Jacks |
Description |
HCS DataLink 500A patented unshielded
RJ45 tool-less keystone jack series includes high performance
Category 6A snap-in 8-position/8- contact (8P8C) jacks conforming to IEC 60603-7-41 (unshielded 500 MHz connectors). HCS DataLink 500A tool-less jacks are designed for fast and easy snap-in and out of wall plates, patch panels and surface box outlets. HCS DataLink 500A tool-less jacks are available in 90° or 180° orientation. All jacks fully conform to all ANSI/TIA-568.2-D and IEC 60603-7-41 component requirements, tested at the component level. The HCS Logo and the DataLink 500A Trademark ensure long lasting high-performance and full support of all applications up to 10GBASE-T (10 Gigabit-Ethernet). |
Application | ||
HCS DataLink 500A unshielded RJ45 tool-less keystone jacks are used
in wall outlets, blank patch panels and surface box outlets. P/N J6A-00853 has inherent AXT rejection and it can be used with all HCS panels, except 48-Port 1U panels (HD Panels). P/N J6A-00856 can be used with HCS Staggered panel, P/N P00-02430-1U and 16-Ports panels in order to ensure CAT6A AXT compliance. HCS DataLink 500A unshielded copper RJ45 tool-less keystone jacks fully support all presently available LAN applications up to up to 10GBASE-T, including the following protocols: |
||
☑ 10GBASE-T
10 Gigabit Ethernet (IEEE 802.3an) ☑ 1000BASE-T Gigabit Ethernet ☑ ATM 155 ☑ TP-PMD ☑ 100BASE-T "Fast Ethernet" ☑ 100BASE-T2 |
☑ 100BASE-T4 ☑ 100BASE-TX ☑ Token Ring 100 Mbps ☑ ATM 52 ☑ ATM 25 ☑ 10BASE-T Ethernet |
☑ Token
Ring 4 Mbps and 16 Mbps ☑ Broadband and Baseband Video ☑ ISDN Basic and Primary Access ☑ 1BASE-5 Starlan ☑ ISALAN ☑ ITU V.21 and X.11 ☑ IEEE 802.3 PoE Types 1, 2, 3 & 4 |
Qualifications and Approvals |
||
HCS DataLink 500A unshielded RJ45 tool-less keystone jacks are supported by the Century™ Lifetime Warranty and by the DoubleSafe™ QA program as a part of complete HCS cabling system. All jacks are tested and verified at the component level and they comply with IEC 60603-7-41 (8-way, unshielded, free and fixed connectors, for data transmission with frequencies up to 500 MHz) and the following standards: |
Transmission: | EMC: | Safety: |
☑ ANSI/TIA-568.2-D
CAT6A ☑ ISO/IEC 11801 Class EA ☑ IEC 60603-7-41 500MHz connector |
☑ EN-55022, Class B (Europe) ☑ FCC Part 15, Subpart J, Class A (USA) |
☑ UL94
V-0 rated plastic materials ☑ UL listed as Communications-, Audio/Video-, Data- and Other Signaling-circuit Accessories ☑ EU RoHS Directive |
Benefits & Features |
→
Exceptional material properties and design - providing a unique
Century™ Lifetime Warranty. → Patented 90° or 180° design - providing easier access, better and faster wire connection. → Detailed installation manual in English and Turkish - providing clear and comprehensive instructions. → Exceeding Category 6A performance - providing full support to 10 Gigabit Ethernet. → Robust and installer-friendly design - providing reduced installation and operating costs → Compatible with 22-26 AWG solid or stranded conductors - providing support to a wider range of cabling types. → Unique DoubleSafe™ Quality Assurance Program - providing lowest rejection rate available. |
GENERAL PROPERTIES | ||
Housing material | High impact, Flame-retardant plastic compound, UL 94 V-0. |
Jack contacts spring material | High strength phosphor bronze alloy |
Jack contacts plating | 1.27 µm (50µ") gold plating |
IDC contacts material | High strength phosphor bronze alloy |
IDC contacts plating | 2.3 µm (100µ") 100% Sn Alloy |
Operating environmental conditions | 0 to +60C at 5-95% RH (Non condensing) |
Storage environmental conditions | -40 to +66C at 5-95% RH (Non condensing) |
Packaging | 50 or 100 units per box. |
Plug to jack Retention Force | 49N min. |
Plug to jack mating force | 9N max. for 8 wire jack. |
Terminated wire retention force | Axial pullout force: 9N min. Normal pullout force: 44N min |
Insertion/Extraction durability | 750 mating cycles conforming to IEC 60603-7 Level A durability. |
IDC termination durability | 200 terminations min. acc to TIA/EIA 568B.2 requirements. |
Conductor compatibility range | 22 to 26 AWG |
Standard Color | White RAL 1013. Other colors available upon request. |