Description

HCS DataLight MTP® Assemblies series contain a full range of high quality assemblies factory terminated with MTP® connectors. HCS DataLight MTP® Assemblies are available with most fiber types including Singlemode 9/125 microns, Multimode 50/125 microns (OM2, OM3, OM4 and OM5) and Multimode 62.5/125 microns fibers in any length required. The assemblies are available with di erent cable types and colors, including bare ribbon cables, jacketed ribbon cables, ruggedized (trunk) ribbon cables and indoor MTD cables, with 12 or 24 fibers. HCS DataLight Patch Cords and Pigtails comply with both major industry standards, ANSI/TIA-568.3-D (Optical Fiber Cabling Components Standard) and IEC 60874 (Connectors for optical fibers and cables) and they are supported by the DoubleSafe™ QA program as a part of complete HCS cabling system.

Application

☑ Mission critical applications such as Data Centers and Storage Area Networks ☑ Applications where fast installation is paramount ☑ Environments where moves adds and changes are frequent or managed in-house ☑ FiberOptic cross connect, patch panels, and distribution point connection ☑ ODF connections ☑ Fiber to the desk connection ☑ Active FiberOptic equipment connection

Qualifications and Approvals

HCS DataLight components are supported by the DoubleSafe™ QA program as a part of complete HCS cabling system and comply to ANSI/TIA-568.3-D (Optical Fiber Cabling Components Standard) and IEC 60874 (Connectors for optical fibers and cables). HCS DataLight MTP® Assemblies are designed to support a variety of high-speed network topologies including:

☑  IEEE 802.3 10GBase-SR/SW 10Gbps ☑  IEEE 802.3 10GBase-LX4 10Gbps ☑  Fiber Channel 400-M5-SN-1 4Gbps ☑  Fiber Channel 1200-M5E-SN1 10Gbps ☑  Fiber Channel FC-PH 1Gbps

☑  IEEE 802.3 1000Base-SX/LX 1Gbps ☑  FDDI 100Mbps ☑  IEEE 802.3 FOIRL 10Mbps ☑  IEEE 802.3 10Base-F 10Mbps ☑  ATM 155 Mbps, 622 Mbps, 1.2 Gbps & 2.4 Gbps

Benefits & Features

→ Premium factory-controlled optical performance - enables flexible system configuration and fast installation. → Low Smoke Zero Halogen allows for routing cables in any indoor environment. → Industry-leading low insertion loss and Ultra low insertion lost. → Each and every assembly pre-tested before shipment. → Round, flexible outer jacket is easy to bend, route and install. → Full compliance to industry standards - providing high quality components. → Available with all major fiber types - providing a wide range of products. → Robust design - ensuring long life and short replacement rates. → Unique DoubleSafe™ Quality Assurance Program - providing lowest rejection rate available.

	Technical Specifications - MTP® Connectors

Connector Housing	PET
Connector Ferrule	PPS
Boot	Silicone
Flame Test	UL-94 V-0
Max.Insertion Loss	Multimode @850nm Type 1: 0.50dB Type 2: 0.35dB Type 3: 0.25dB	Singlemode @1310nm Type 1: 0.75dB Type 2: 0.50dB Type 3: 0.35dB Type 4: 0.25dB

	Technical Specifications - Complete Assemblies

SM Return Loss	Min: 55 dB Mean: 60dB
MM Return Loss	Min: 25 dB
SM Connection Durability	Max IL Increase: 0.2dB
MM Connection Durability	Max IL Increase: 0.2 dB
SM Mating Cycles	500
MM Mating Cycles	500
Operating Temp.	-0 to +70C
Installation Temp.	-0 to +70C
Storage Temp.	-40 to +70C

	Durability Tests - Maximum Attenuation Increase after test

Test	Max. Increase	Notes
Temperature Cycling: -40 to +85C	0.1 dB	10 Cycles
High Temp. Endurance: +85C	0.1 dB	96 Hours
Low Temp. Endurance: -40C	0.1 dB	96 Hours
High Humidity Endurance: 95% RH @ +40C	0.1 dB	96 Hours
Vibration Endurance: 10-55 Hz, 1.5 mm	0.1 dB	P to P
Tensile Endurance: 0-10 Kgf @ 1 minute	0.1 dB	-
Connection Durability: 1000 cycles	0.1 dB	-