HCS FULL P/N SYSTEM
REV: 040817-2
| 1 | 2 | 3 | - | 4 | 5 | 6 | 7 | 8 | - | 9 | 10 | 11 | - | 12 | 13 | 14 | 15 | 16 | 17 |
|
Product Type |
Category Fiber Type |
- |
Flame Test |
Pair Count |
Various Options |
- |
Packaging Type |
Length m |
Jacket Color |
- |
CPR Class B to F |
Dup A, B... |
% Braid Coverage |
Drain Wire |
Options | ||||
The green part is the basic number that appears in the catalog, in the
specs and in the ETL certificates.
The blue part indicates packaging type, length and jacket color.
The yellow part indicates the CPR class, braid coverage, drain wire and
other options.
Notes:
12: CPR Class B2ca (B) to Fca (F).
13. The default symbol in this position is A.
If two cables have the exact same P/N and CPR
class but have different construction this position will be B, C ....Z.
14-15: These positions will indicate the exact braid coverage in %. If the
cable has no braid shield these positions will be 00.
16: If the cable contains a drain wire these positions will be W. If the
cable does not contain a drain wire these positions will be 0.
17: This position can be used to other options, indicated with 1-9 and A to
Z. The default symbol is 0.
| Basic P/N | Packaging Length & Color | ||||||||
|
1:
Product Group |
2-3: Product Type |
- |
4: Flame Test |
5-6 | 7-8 | - | 9: Packaging Type |
10: Length |
11: Jacket Color |
| A=Armored Breakout FO cables | 00=Not applicable | 0: IEC 60332-1 B: IEC 60332-3-22 C: IEC 60332-3-24 D: IEC 60332-3-25 |
Number of Pairs, Ports or Units. (**) | Options | A=Special | B=25m | Default: Gray RAL 7035 |
||
| B=Baluns | 01=Power & Control | B=Reelex II™ | C=50m | ||||||
| C=Cabinets & Wiring Blocks | 02=Voice & DSL Grade | C=Coil | D=90m | ||||||
| D=Fiber-to-the-desk FO Cables | 03=Category 3 | D=Drum Type N/S | H=100m | ||||||
| E=Armored SLT FO Cables | 05=Category 5 | F=Reel in box | J=200m | ||||||
| F=Flexible Copper Cables | 5E=Category 5E | G=Reelex I™ | L=250m | ||||||
| G=Armored MTD FO Cables | 5F=Category 5 120 Ohm | P=Plywood Drum | K=305m | ||||||
| H=Solid Copper Cables | 06=Category 6 | W=Wooden Drum | P=500m | ||||||
| J=Copper Connectors | 6E=Category 6E (600 MHz) | M=1000m | |||||||
| K=Kits, Tools & Splitters | 6A=Category 6A (500 MHz) | Q=1500m | |||||||
| L=Simplex/Duplex FO Cables | 07=Category 7 (600 MHz) | R=2000m | |||||||
| M=Indoor/Outdoor MTD FO Cables | 7A=Category 7A (1000 MHz) | T=3000m | |||||||
| N=Indoor MTD FO Cables | 7B=1200 MHz | V=4000m | |||||||
| P=Panels | 08=Category 8 (2000 MHz) | N=5000m | |||||||
| Q= MLT FO Cables | 10=DataLine 10 | S=10Km | |||||||
| R=Breakout FO Cables | 20=DataLine 20 | ||||||||
| S=Outdoor SLT FO Cables | 30=DataLine 30 | In Patch Panels: XU = Number of units | |||||||
| T=Terminated Cords & Patch Cables (*) | 52=50/125µ FO OM2 | ||||||||
| U=Armored MLT FO Cables | 54=50/125µ FO OM3 | ||||||||
| V=FO Connectors and Couplers | 55=50/125µ FO OM3 Bend Insensitive | ||||||||
| W=Outlets and Faceplates | 56=50/125µ FO OM4 | ||||||||
| X=Aerial FIG-8 Armored SLT FO Cables | 57=50/125µ FO OM4 Bend Insensitive | ||||||||
| Y=Special FO Cables | 61=62.5/125µ FO OM1 | ||||||||
| Z=Special Copper Cables | 91=Singlemode FO OS1 | ||||||||
| 92=Singlemode FO OS2 | |||||||||
| 93=Singlemode FO ITU-T G.652.C | |||||||||
| 94=Singlemode FO ITU-T G.652.D | |||||||||
| 95=Singlemode FO ITU-T G.655 | |||||||||
| 96=Singlemode FO ITU-T G.656 | |||||||||
| A1=Singlemode FO ITU-T G.657.A1 | |||||||||
| A2=Singlemode FO ITU-T G.657.A2 | |||||||||
| B2=Singlemode FO ITU-T G.657.B2 | |||||||||
| B3=Singlemode FO ITU-T G.657.B3 | |||||||||
| H3=HDMI 1.3 | |||||||||
| H4=HDMI 1.4 | |||||||||
| FO=FO product | |||||||||
| MC=Mixed Copper components | |||||||||
| MF=Mixed Fiber Types | |||||||||
| U2=USB 2.0 | |||||||||
| U3=USB 3.0 | |||||||||
| Jacket Color | C | RAL Numbers |
| Gray | 0 | 7035 or 9002 |
| Blue | 1 | 5015 |
| Orange | 2 | 2003 or 2000 |
| Green | 3 | 6024 |
| Brown | 4 | 8011 |
| White | 5 | 9003 |
| Red | 6 | 3000 |
| Black | 7 | 9004 |
| Yellow | 8 | 1018 |
| Purple or Lilac-Blue | 9 | 4005 |
| Pastel-Blue | B | 5024 |
| Dust-Gray | D | 7037 |
| Yellow Green | G | 6018 |
| Pink | K | 3015 |
| Light Purple | P | 4001 |
| Turquoise | T | 5018 |
* P/N System for Standard Copper Modular Cords | P/N System for TYPE L Copper Modular Cords | P/N System for Fiber-Optic cords ** Flame Test conformance F=0: IEC 60332-1 F=B: IEC 60332-3-22 F=C: IEC 60332-3-24 F=D: IEC 60332-3-25 |
||